MWT100/2.5MW
MWT100/2.5MW
The followings are MWT100/2.5 wind turbine power curve and the air density of 1.225kg/m ³ (temperature 15 ℃, pressure 1013hPa), the corresponding numerical blade cleaning, horizontal, standard air condition.
Remarks:
The following assumptions and conditions is just to describe the relationship between wind speed and the output power , not a guarantee for numerical under he actual conditions.
* the above is 10 min average wind speed data measured at the hub height .
* output power is measured at the converter low-end in the cabin.
* in order to satisfy the requirement of computing power output curve, the turbulence intensity is assumed to be 10%.
* For the power curve, the ground and any external factors will affect the power output. (such as the loss of the grid type, etc.)
* the power curve is obtained under the wind field conditions of IEC Class IIA standard and the below.
|
